Will a Qi2 Detachable Wallet Case Fit iPhone 13 Pro and Pixel 8?

Part of our guide on qi2 ring sticker holding pixel 10 pro

Verdict: qi2 detachable wallet case for iphone 13 pro fits and charges, Pixel 8 needs help

A Qi2 detachable wallet case for iPhone 13 Pro fits and charges at 15W when the case has a centered Qi2 or MagSafe ring and your phone runs iOS 17.2 or newer. The wallet clicks on for cards and snaps off for charging or a gym mount. We see this combo hold through a full training session. Pixel 8 does not include that magnet ring from the factory.

The iPhone 13 Pro has built-in MagSafe magnets and Apple enabled Qi2 15W charging with iOS 17.2. That means any Qi2 detachable wallet case aligns on its own. You get full speed without fiddling with placement. The wallet stays put because the magnets match.

Pixel 8 will sit in the same case size but its back has no MagSafe magnets. A magnetic wallet slides or falls off. Charging still works on a Qi pad but at slower 5W to 7.5W and with poor alignment. Add a Qi2 snap-on ring or a Qi2 case for Pixel 8 and both problems go away. Measure twice.

• iPhone 13 Pro: native magnets, Qi2 15W from iOS 17.2, wallet holds
• Pixel 8: no native ring, needs snap-on ring or Qi2 case to hold wallet
• Both phones: remove wallet for fastest charging and for magnetic mounts

Fit: why iPhone 13 Pro needs a Qi2-rated case for the wallet to stay on

A proper Qi2 case holds with 800 to 1200g pull when the magnet ring is centered and the case wall is under 2.5mm thick. Go thicker and the wallet wobbles. We notice the difference on a treadmill where vibration tests the hold. Thin, rigid backs win. The other half of this decision is charging pixel 8 pro through wallet case.

The iPhone 13 Pro measures 146.7mm tall and its magnet ring sits around the Apple logo. A Qi2 detachable wallet case mirrors that ring with N52 magnets. If the ring is off-center by even 1mm, alignment suffers and charging slows. Good cases mold the ring into the shell, not as a sticker.

Cheap magnetic cases sometimes use a weak ring or place it low. The wallet still clicks but peels under weight. Three cards plus a key is enough to pull it off. Check the listing for Qi2 certification and a stated magnet layout. No spec listed is a warning. Choose wisely.

• Look for: Qi2 certified, MagSafe compatible, stated N52 magnets
• Avoid: thick TPU over 3mm at the ring, no alignment mention
• Test: wallet should not twist with two fingers of pressure

Rings: is Qi2 snap-on ring compatible with Pixel 8

A Qi2 snap-on ring compatible with Pixel 8 works when it is a Qi2-certified ring with 15W support and strong N52 magnets, stuck dead center on a thin case. The Pixel 8 has Qi wireless charging but no built-in magnet ring. The ring adds the missing alignment and hold. We use this setup for car and gym mounts. We go through magnetic wallet holding pixel 9 step by step elsewhere on the site.

Place the ring so its center matches the Pixel 8 coil, about the middle of the back. Most rings include a clear alignment guide. Clean the case with alcohol, press for 30 seconds, and wait an hour. A metal plate without Qi2 will hold a wallet but kills wireless charging. Qi2 rings keep the coil open.

Expect 7.5W to 15W depending on charger and ring. Some Pixel 8 units negotiate 12W on Qi2 chargers. That is still faster than plain Qi at 5W. The wallet now snaps like it does on iPhone. Pull force of 1000g or more feels solid in a pocket. It works.

iPhone 13 Pro snaps to Qi2 at 15W, Pixel 8 only holds a wallet after you add the missing magnet ring.

Basics: what is a Qi compatible phone and what Qi2 adds

A Qi compatible phone has a Qi coil that can receive wireless power from any Qi charger, usually at 5W to 15W depending on the phone and pad. Qi is just the power standard. If the spec sheet lists Qi wireless charging, it will charge on a Qi pad. No magnets needed. Before you commit to anything, it is worth looking at tripod with magsafe charging for iphone.

Qi2 keeps the same Qi power but adds a Magnetic Power Profile with a ring of magnets for alignment. That ring locks the coils together. Result is faster, cooler 15W charging and a stable hold for wallets, stands and gym mounts. Think of Qi as power, Qi2 as power plus magnets.

iPhone 13 Pro is Qi and, with iOS 17.2, Qi2 at 15W. Pixel 8 is Qi at up to about 12W on good pads, but not Qi2 without a ring or Qi2 case. A Qi2 charger still charges a Qi-only phone, just without magnetic lock and often slower. Check the charger spec too.

• Qi compatible: has Qi coil, charges on any Qi pad
• Qi2: Qi plus magnet ring, 15W and auto-alignment
• MagSafe: Apple’s magnet system, compatible with Qi2

Hold: how detachable wallets stay on during training and filming

A detachable wallet holds with magnets plus friction, not just magnets. The Qi2 ring gives pull around 1000g, the wallet’s felt back adds grip. Together they resist the peel that happens when you bump a rack or pull the phone from a tight pocket. We see failures when lint coats the contact.

In the gym we snap the wallet off for filming. The phone sits on a MagSafe gym mount or tripod. Weight matters here. A loaded wallet adds 40g to 70g and raises the lever arm. That leverage peels weaker magnets. Keep cards to three and skip coins.

On a bike or in a car, vibration is the test. A good Qi2 wallet does not rotate after a mile. If it does, the case is too thick or the ring is weak. Clean both faces, re-seat with a firm press, and try again. Still loose means replace the case. Simple fix.

• Gym filming: phone on mount, wallet off, no wobble
• Daily carry: three cards max, wallet on, check twist
• Travel: snap wallet off for Qi2 charging, then back on

Pick: how to choose a Qi2 detachable wallet case that actually holds

Start with Qi2 certification and a stated 15W rate, not just MagSafe compatible. Certified cases list Qi2 in the bullets and show the ring molded in. Uncertified cases often hide weak magnets. We pick certified when hold matters.

Check thickness and material. A rigid back under 2.5mm at the ring beats thick soft TPU. Look for a raised lip around the camera and a clear ring outline inside the case. That outline tells you the magnets are placed correctly. No outline is a guess.

For Pixel 8, decide between a Qi2 case or a snap-on ring. A Qi2 case looks cleaner and keeps thickness down. A ring is cheaper and works with a case you already like. Either way, confirm the ring is Qi2, not a plain metal sticker. That detail decides charging.

1. Confirm your phone and OS: iPhone 13 Pro on iOS 17.2+ for 15W Qi2, Pixel 8 needs ring or Qi2 case
2. Filter listings to Qi2 certified and 15W, check bullets for N52 magnets
3. Check case thickness under 2.5mm at the ring and centered alignment
4. For Pixel 8 add a Qi2 snap-on ring with guide, or buy a Qi2 case
5. Test hold: wallet should resist twist and not peel with three cards

FAQ

We test these cases on racks, bikes and Qi2 pads to see what actually holds.